Tubidy MP3 & MP4

En popüler MP3 müziklerinizi ve MP4 videolarınızı ücretsiz indirin. Geniş bir multimedya içeriği seçkisini keşfedin ve sorunsuz indirmelerin tadını çıkarın.

TIP #017: For complex boards, always build minimum 3, but rather 5 prototypes

5:37 |

Yükleniyor...

Hızlı erişim için Tubidy'yi favorilerinize ekleyin.

İlgili Videolar

TIP #044: When doing placement under BGA, first only check where the free space is and then

4:48 |

TIP #070: You may want to use 1% resistors instead of 5% resistors

5:42 |

TIP #040: Use the chip manufacturer support as few as possible

4:15 |

Airplane Accidently Came in the Runway During Landing Of A380...

0:20 |

TIP #019: Always be sure that the pin numbers in schematic are pointing to ...

4:30 |

This is BETTER than a paper airplane?? 🤯 #Shorts

0:38 |

TIP #011: Don’t forget to place mounting holes on your board

2:12 |

TIP #069: You can use an industrial hot air gun to replace (solder / desolder) components ...

2:13 |

TIP #029: Be sure you connect enough pins on connector to carry high currents

3:47 |

TIP #058: Create board variants (if your CAD software supports it)

7:45 |

TIP #023: Don’t be scared of creating components by yourself

5:02 |

Tubidy MP3 & MP4

TIP #017: For complex boards, always build minimum 3, but rather 5 prototypes

Type

Size

İlgili Videolar

TIP #017: For complex boards, always build minimum 3, but rather 5 prototypes

TIP #057: If you are testing your prototype and something is wrong, do not ...

TIP #050: Read Errata documents

TIP #018: Always create a BOX around the ribbon cable headers

TIP #009: Choose two or three biggest component suppliers ...

TIP #015: Create a TODO file to list the changes for the next board version

TIP #034: Have a look at what your competition is using

TIP #030: Do Paper model of your board

TIP #003: Use “+” sign as a prefix of all your power net names

TIP #044: When doing placement under BGA, first only check where the free space is and then

TIP #070: You may want to use 1% resistors instead of 5% resistors

TIP #040: Use the chip manufacturer support as few as possible

Airplane Accidently Came in the Runway During Landing Of A380...

TIP #019: Always be sure that the pin numbers in schematic are pointing to ...

This is BETTER than a paper airplane?? 🤯 #Shorts

TIP #011: Don’t forget to place mounting holes on your board

TIP #069: You can use an industrial hot air gun to replace (solder / desolder) components ...

TIP #029: Be sure you connect enough pins on connector to carry high currents

TIP #058: Create board variants (if your CAD software supports it)

TIP #023: Don’t be scared of creating components by yourself

Tubidy MP3 & MP4

TIP #017: For complex boards, always build minimum 3, but rather 5 prototypes

Type

Size

İlgili Videolar

TIP #017: For complex boards, always build minimum 3, but rather 5 prototypes

TIP #057: If you are testing your prototype and something is wrong, do not ...

TIP #050: Read Errata documents

TIP #018: Always create a BOX around the ribbon cable headers

TIP #009: Choose two or three biggest component suppliers ...

TIP #015: Create a TODO file to list the changes for the next board version

TIP #034: Have a look at what your competition is using

TIP #030: Do Paper model of your board

TIP #003: Use “+” sign as a prefix of all your power net names

TIP #044: When doing placement under BGA, first only check where the free space is and then

TIP #070: You may want to use 1% resistors instead of 5% resistors

TIP #040: Use the chip manufacturer support as few as possible

Airplane Accidently Came in the Runway During Landing Of A380...

TIP #019: Always be sure that the pin numbers in schematic are pointing to ...

This is BETTER than a paper airplane?? 🤯 #Shorts

TIP #011: Don’t forget to place mounting holes on your board

TIP #069: You can use an industrial hot air gun to replace (solder / desolder) components ...

TIP #029: Be sure you connect enough pins on connector to carry high currents

TIP #058: Create board variants (if your CAD software supports it)

TIP #023: Don’t be scared of creating components by yourself

Favorilere Ekle