Tubidy MP3 & MP4

En popüler MP3 müziklerinizi ve MP4 videolarınızı ücretsiz indirin. Geniş bir multimedya içeriği seçkisini keşfedin ve sorunsuz indirmelerin tadını çıkarın.

Hilos for Mini Minor suspension, drilled and tapped M20, bored and profiled in small cnc lathe
Hilos for Mini Minor suspension, drilled and tapped M20, bored and profiled in small cnc lathe
|
Yükleniyor...
Lütfen bekleyiniz...
Type
Size

İlgili Videolar

Hilos for Mini Minor suspension, drilled and tapped M20, bored and profiled in small cnc lathe

Hilos for Mini Minor suspension, drilled and tapped M20, bored and profiled in small cnc lathe

|
Reaming 1/2" in the head of a M20 bolt, used for Hilo conversion in a Classic Mini Suspension

Reaming 1/2" in the head of a M20 bolt, used for Hilo conversion in a Classic Mini Suspension

|
Cnc lathe threading a Hose Barb for Classic Mini Minor A series Engines. Drilled, turned, & parted

Cnc lathe threading a Hose Barb for Classic Mini Minor A series Engines. Drilled, turned, & parted

|
Cnc lathe threading brass part, drilled in one lathe and bored & tapped in another small cnc lathe

Cnc lathe threading brass part, drilled in one lathe and bored & tapped in another small cnc lathe

|
Adjusting Screw for Classic Mini Hilo

Adjusting Screw for Classic Mini Hilo

|
Mini Minor Engine Adaptor in brass. Turned, thread cut drilled & parted off. CNC lathe with turret

Mini Minor Engine Adaptor in brass. Turned, thread cut drilled & parted off. CNC lathe with turret

|
CNC lathe threading & cnc mill cutting serrations on oil cap for a vintage B24, BSA Empire Star

CNC lathe threading & cnc mill cutting serrations on oil cap for a vintage B24, BSA Empire Star

|
Cnc lathe threading brass at 3000rpm. Drill and tap M10 in a second lathe

Cnc lathe threading brass at 3000rpm. Drill and tap M10 in a second lathe

|
Speeding up a boring job in cnc mini lathe. Boring in X rather than Z using a subroutine

Speeding up a boring job in cnc mini lathe. Boring in X rather than Z using a subroutine

|
2-5/16" threads on small cnc lathe for old BSA

2-5/16" threads on small cnc lathe for old BSA

|
How I make this brass part in my cnc lathe Drill, turn, groove, bore, tap and part off operations

How I make this brass part in my cnc lathe Drill, turn, groove, bore, tap and part off operations

|
CNC lathe threading and tapping vintage BSA Empire Star motor cycle part

CNC lathe threading and tapping vintage BSA Empire Star motor cycle part

|
Carbide inserts for the Chinese mini lathe. Ground or moulded?

Carbide inserts for the Chinese mini lathe. Ground or moulded?

|
Cnc lathe threading M8, drill and rotary broach

Cnc lathe threading M8, drill and rotary broach

|
Cnc lathe making brass solenoid nut, turn, drill, centre drill, thread 0.75 Pitch and 1.5 part off

Cnc lathe making brass solenoid nut, turn, drill, centre drill, thread 0.75 Pitch and 1.5 part off

|
Dennes - Mini adjustable suspension kit

Dennes - Mini adjustable suspension kit

|
20 Cutting Threads on Metal Lathe

20 Cutting Threads on Metal Lathe

|
Carbide Insert for Aluminium, turning Steel. Try it in your Chinese mini lathe. You might like it.

Carbide Insert for Aluminium, turning Steel. Try it in your Chinese mini lathe. You might like it.

|
Using a sub routine this part is bored in X direction rather than Z. Turned, drilled, bored & parted

Using a sub routine this part is bored in X direction rather than Z. Turned, drilled, bored & parted

|
Small cnc lathe with Air Chuck and 6061 aluminium. Short cut cycles to stop the swarf tangles

Small cnc lathe with Air Chuck and 6061 aluminium. Short cut cycles to stop the swarf tangles

|