Tubidy MP3 & MP4

En popüler MP3 müziklerinizi ve MP4 videolarınızı ücretsiz indirin. Geniş bir multimedya içeriği seçkisini keşfedin ve sorunsuz indirmelerin tadını çıkarın.

Delrin part in a smallcnc lathe with OOPS!

5:34 |

Yükleniyor...

İlgili Videolar

Delrin part in a smallcnc lathe with OOPS!

5:34 |

Delrin part, made in cnc lathe with Air Chuck, Parting Tool and Slot Drill used as a boring bar

5:56 |

Small cnc lathe makes 3 delrin parts from a single blank, slot drill as boring bar

4:33 |

Parting coloured delrin in a manual lathe, did not go well

0:44 |

Drilling undersize in delrin and fixing it. Small cnc lathe

6:51 |

Turning Delrin on a small cnc lathe, Sumitomo FC insert and parting tool with 9.0mm stub drill

4:45 |

Fixed my Clutch With Plastic and my Metal Lathe: Delrin to the Rescue

4:42 |

Cnc lathe making brass solenoid nut, turn, drill, centre drill, thread 0.75 Pitch and 1.5 part off

4:51 |

Mini Minor Engine Adaptor in brass. Turned, thread cut drilled & parted off. CNC lathe with turret

4:46 |

2-5/16" threads on small cnc lathe for old BSA

9:50 |

Drill and tap the Delrin Handle

6:33 |

5C collet holding threaded brass fitting without thread damage in small cnc lathe

5:22 |

Drill once and make 3 parts in Aluminium 2011. Stub drill & Sumitomo carbide insert parting tool

4:22 |

This small cnc lathe can't tap threads. I try the G84 tapping command to see what happens.

2:27 |

Tubidy MP3 & MP4

Delrin part in a smallcnc lathe with OOPS!

Type

Size

İlgili Videolar

Delrin part in a smallcnc lathe with OOPS!

Delrin part, made in cnc lathe with Air Chuck, Parting Tool and Slot Drill used as a boring bar

Small cnc lathe makes 3 delrin parts from a single blank, slot drill as boring bar

Parting coloured delrin in a manual lathe, did not go well

Drilling undersize in delrin and fixing it. Small cnc lathe

Turning Delrin on a small cnc lathe, Sumitomo FC insert and parting tool with 9.0mm stub drill

Fixed my Clutch With Plastic and my Metal Lathe: Delrin to the Rescue

Cnc lathe making brass solenoid nut, turn, drill, centre drill, thread 0.75 Pitch and 1.5 part off

Mini Minor Engine Adaptor in brass. Turned, thread cut drilled & parted off. CNC lathe with turret

2-5/16" threads on small cnc lathe for old BSA

Drill and tap the Delrin Handle

5C collet holding threaded brass fitting without thread damage in small cnc lathe

Drill once and make 3 parts in Aluminium 2011. Stub drill & Sumitomo carbide insert parting tool

Delrin Lathe Job, low run production

New To Me Lathe Making Delrin Bushings For IRS

8X16 MINI LATHE TURNING DELRIN MAK8NG MANDRELS 😎 #shorts

Delrin Knob Turning

15L - Delrin Washer Rev 2

Turning Acetal (POM, Delrin) on mini-lathe

This small cnc lathe can't tap threads. I try the G84 tapping command to see what happens.